Parts

The RockShox SID SL Ultimate BRAIN incorporates a race-tuned Brain Inertia Valve with Position-Sensitive technology into the all-new RockShox SID SL chassis. New Position-Sensitive Brain technology provides more platform support while maintaining small bump compliance and chassis balance, making this the most efficient BRAIN yet. Position-Sensitive technology allows riders to sag into the fork 15mm for a balanced ride, providing supple small bump compliance and a firm pedaling platform without the need for a remote lockout or levers to flip. All new SID SL Ultimate Chassis features a machined alloy crown to shed even more weight while increasing stiffness. - New Position-Sensitive tune provides an increase in platform support. - New SID SL Ultimate chassis features increased stiffness, lighter weight, and reduced friction. - Torque cap compatible for stiff dropout/hub interface. - 100mm travel, 44mm offset, 110mmx15mm hub spacing.

Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1

- Single-ring drivetrain simplifies functionality and reduces weight - Direct mount chainring - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - DUB bottom bracket adds durability, simplicity and broad compatibility - Can be upgraded to a power meter

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg

We’re redefining comfort and performance with Mirror technology to take Body Geometry into the future. The last big material innovation in saddle design happened decades ago with the introduction of foam. To develop a next-generation saddle, we had to look beyond foam and develop a next-generation technology. The S-Works Romin EVO Saddle with Mirror is the future. We developed Mirror technology by 3D printing from liquid polymer to perfectly reflect your anatomy. This revolutionary process creates a complex honeycomb structure that allows us to infinitely tune the material’s density in a way impossible with foam. The result is a patent-pending matrix of 16,000 struts and 7,799 nodes, each of which can be tuned individually. And when you combine this technology with our extremely lightweight S-Works Romin EVO saddle, with its flex-tuned FACT carbon shell and ultra-light rails, you get a high-performance saddle that's designed to help you perform at your best. It features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort for your unique position. - Patented Body Geometry design is lab-tested for both men and women to assure blood flow to sensitive arteries. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-kind honeycomb structure that offers superior sit-bone support and comfort. - FACT carbon fiber shell is flex-tuned for support and ride compliance. - Ultra-light, strong, and oversized FACT carbon rails. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - NOTE: Oversized 7x9mm carbon rails are not compatible with seatposts equipped with side-load clamp mechanisms for 7mm round rails.

- Ultra-light carbon composite reduces the weight while maintaining a stiff construction - Short reach and shallow drop for instant transition from the tops to the hoods to the drops - The round-shape clamping design ensures better fitting adjustments for hand and body positions - The center of clamping area meet with handlebar top seamlessly to improve aerodynamics while saving weight - An aero-optimized flattened top section reduces the front face area and improves the airflow - The edge of the handlebar top features a wider and lifted shape for better aero position - Elliptical drops improves bar stiffness without adding weight - Cable openings features a bigger opening making routing easier

Engineered for endurance riding, the ultra-lightweight Contact SLR D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for superior compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Precision composite lay-up for optimal weight and stiffness. - 40% more compliant and 15 grams lighter than the previous Contact SLR D-Fuse handlebar. SPECIFICATIONS: - Weight: 185g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 380/400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Carbon

With Versatile Contact Position drops that feature an 8-degree flare, 3-degree outsweep and 40mm tails, the CADEX AR Handlebar sets a new standard for all-road control. A 70mm reach and shallow 115mm drop make it easy to transition from the tops to the hoods and drops. And an innovative one-piece mold construction boosts strength and stiffness while still maintaining a best-in-class weight. - 8-degree flare and 3-degree out sweep provide total control over variable surfaces. - Extended 40mm tails on the drops add stability and leverage for increased confidence when sprinting or descending. - 3-degree backsweep delivers increased comfort and balance on the tops. - A 70mm reach and shallow 115mm drop allow quick and controlled transitions between the tops, the hoods and the drops. - One-piece, no-bond mold manufacturing process reduces weight and increases strength and stiffness. - Precision carbon fiber layup provides added strength at minimal weight. - Compatible with Shimano Di2 Bar End Type Junction.

Superlight weight for a competitive edge. Comfort to carry you through long training days and crushing queen stages. The all-new CADEX Race Handlebar features innovative one-piece construction and an ergonomic design that’s stiff, responsive and easy on your hands.

- Proprietary engineering for the D-shaped steer of new generation Giant Propel - Ultra-light carbon composite reduces weight while optimizing the aerodynamic shape - Integrated aero shape from stem cap spacers to the headtube - Rounded front cap shape which connect the handlebar for improving the airflow from side angle - Square-engineered shaping achieves maximum stiffness and low weight - Simplified cable management hides all the cables underneath the stem

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

Mirror goes Pro. Our best-reviewed saddle technology, based on two decades of Body Geometry research and development, is now available on the Power Pro saddle. Looking beyond foam, we developed Mirror technology. By 3D printing with a liquid polymer to create an infinitely tunable honeycomb structure, Mirror saddles perfectly reflect your anatomy to keep you comfortable, powerful, and healthy in your unique position. The Power Pro with Mirror starts with our Power shape—beloved by riders worldwide for its extra-wide and elongated Body Geometry channel—and is topped with the exact same Mirror pad as our S-Works Power with Mirror, a patent-pending matrix of 14,000 struts and 7,799 nodes, each of which can be tuned individually to deliver unprecedented sit bone comfort and soft tissue protection. But our Pro-level saddle features titanium rails and a reclaimed carbon fiber base to bring Mirror technology to more riders on more terrain than ever before. The bike may be the most sustainable transportation ever created, but we need to do more. The saddle's carbon base is built with our all-new reclaimed carbon process. This is our first step on the road to closed-loop production, maximizing efficiency in production and minimizing waste. Using carbon scraps from factory production, combined with injected nylon, we're building a more sustainable carbon base. With the Power Pro's titanium rails, Mirror technology is now more durable than ever. It's so strong that our Mirror technology is now trail-ready, so go ahead and huck that gap. Trail riders have sit bones too, after all. Whether you're on the road or trail, going up or down, the Power Pro with Mirror will get you there comfortably and quickly. It's the perfect reflection of you. - Titanium rails. - Mirror technology utilizes 3D printing from liquid polymer to create a one-of-a-kind honeycomb structure that offers superior sit-bone support and comfort. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Approximate weight: 251g (Size 155mm) - Approximate weight: 245g (Size 143mm)

The Romin EVO Pro with Mirror starts with our Body Geometry methodology and combines this with our game-changing Mirror saddle technology to create an unmatched combination of performance and comfort. The saddle is designed for riders that prefer an agressive, performance inspired position that still protects soft tissue and blood flow. The result? 26% less pressure, right where it counts. PERFORMANCE MEETS COMFORT: The new Romin EVO Pro with Mirror saddle uses the exact same 3D printed pad as the S-Works Romin EVO Pro with Mirror but now comes with a nylon and reclaimed carbon fiber shell and hollow Ti rails. Our Romin EVO has been a favorite for our professional athletes and racers everywhere season after season. Its traditional long shape is designed to relieve pressure in aggressive, race-inspired positions while allowing the rider to slide backward and forward on the saddle to provide the ideal position for tempo climbing or maximum wattage efforts. Now with Mirror technology, the saddle reduces pressure by up to 26% compared to traditional foam saddles, validated with extensive high-resolution pressure mapping studies. It uses a 3D printed matrix with 22,200 struts and 10,700 nodes and features a unique concave shell to deliver our thickest Mirror pad yet. To ensure your fit is dialed, it comes in two widths: 155mm and 143mm. BODY GEOMETRY AND MIRROR: We know that every body is different, but the issues facing riders in the saddle are the same — sit bone pain, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and even penile blood flow studies (yeah, we did that), Body Geometry and Mirror Saddles don’t just promise to solve these issues for men and women — we’ve proved they do. Unlike traditional single-density foam, Mirror technology allows for infinite density tuning with a single material. But any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retül data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. DURABILITY AND SUSTAINABILITY: By using reclaimed carbon fiber in the shell, we’re keeping scrap carbon fiber out of landfills while creating a light and durable saddle. Add to this hollow Ti rails, and you’ve got a saddle light enough for performance road and XC riding - just 243 grams in a 143 mm width — and tough enough for gravel and trail riding. - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology pad features 22,200 struts and 10,700 nodes, all individually tuned. - SWAT™-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Reclaimed carbon fiber and nylon-injected base. 15% reclaimed carbon fiber. - Size 143mm / Weight: 239g - Size 155mm / Weight: 245g

Specialized's ultra-light S-Works Power saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra-wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. - Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries - Stiff FACT carbon fiber shell tuned for support and ride compliance - Super-light PU padding for comfort and support on longer rides - Ultra-light and strong oversized FACT carbon rails - Tough, light and water-resistant cover - Level 1 padding: Lightest level of padding; most direct connection to the bike - SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions - Weight: 143g (143mm), 155g (155mm)

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard. - The TRS Plus cassette plugs directly into all SRAM Eagle and Shimano XTR, XT, and SLX 12-speed drivetrains - Smaller 9-46T cassette gives a better chainline, for longer-lasting drivetrains - The assembly utilizes XD™ Driver mounting to enable a 9-46T 12-speed cassette, keeping the drivetrain simple, yet providing the gear range of a 2X system - Designed to offer better ground clearance and be run with a smaller chainring to keep equivalent 10-50T gearing (10-50T w/34T chainring = 9-46T w/32T chainring) - 511% range - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-10-12-14-16-18-21-24-28-33-39-46 - Drivetrain Speeds: 12 - Color: Black - Weight: 336 g

Our Box Three tier delivers many of the same capabilities of its more famous siblings yet it's built upon a simpler platform. Cassettes are accessible at 11-46T or 11-50T and fashioned with steel spiders. The derailleur exploits our Limited Slip clutch technology without the Tri-pack features. Shift easily with a comparable mechanism, although you'll forgo the hinged clamp and die-cast structure. And lastly, string it all together with a Prime 9 chain but without extravagant coatings. If you're looking to bring your 2/3 by bike into the 21st century, then level up with this group!

Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Seatpost the lightest post we've ever seen that passes our standards. At 136 grams (27.2mm x 300mm), it's about as light as you'll find. Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist 2-bolt micro-adjust clamp with extended saddle cradle ensures precision fit and secure retention. Available in two sizes, 27.2mm x 300mm and 27.2mm x 360mm, each with a 12mm setback. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - 136 grams (27.2mm x 300mm), - 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - Advanced composite construction delivers light weight and reliability. - Available in two sizes: 27.2mm x 300mm x 12mm offset, 27.2mm x 380mm x 12mm offset - No-Fault crash replacement policy. Lifetime warranty - System Weight Limit: 275lbs / 125kg

The Contact SLR XC 35 Handlebar is the lightest handlebar in the Giant MTB product lineup, purpose built for modern XC riding and racing. With a 0 rise keeping weight over the front of the bike on steep climbs, this superlight bar combines a more traditional 9 degree back sweep with a contemporary 760mm width and 35 mm diameter for added control, stiffness and durability. - Giant advanced carbon layup for maximum damping and durability at minimal weight. - 35mm clamp diameter for added stiffness and control. - 9 degree back sweep with 0 degree rise for modern XC action.

The Terra seatpost is the best choice for riding mixed terrain, gravel, or rough roads because it smooths the ride by allowing significant vertical compliance. The secret to this ride smoothing post is in the composite layup that we utilized. By utilizing composites with varying elongation characteristics at specific locations in the post, we enabled vertical compliance for comfort while retaining requisite strength for mixed terrain riding, all at a sub-200 gram weight (27.2 x 330 x 0). - 18mm Vertical Compliance (20mm offset / Full Extension) - 194 grams (27.2 x 330mm x 0) - Advanced composite construction delivers ride-smoothing vertical compliance. - Available in four sizes: 27.2mm x 330mm x 0 offset, 27.2mm x 380mm x 0 offset, 27.2mm x 330mm x 20mm offset, 27.2mm x 380mm x 20mm offset - No-Fault crash replacement policy. Lifetime warranty - Proven clamp design ensures ease of adjustment and slip-free performance. - System Weight Limit: 275lbs / 125kg

Contact points—those spots where our bodies meet our bikes—are crucial areas for comfort and control. Get it wrong, and even the best bikes can be miserable to ride. We developed the new Terra handlebar to be the paragon of comfort, control, and performance, with an optimized blend of carbon fiber and advanced construction techniques yielding exceptional ride comfort, precise handling, and class-leading strength at an impressively low weight. A shallow drop and moderate reach combine with a 12-degree flare for optimal all-terrain comfort and control. - Optimized blend of high modulus carbon fiber materials and advanced construction techniques yield a light and confident bar - Ergonomic top perch alleviates pressure on the hands - Bar flared 12 degrees at the drops for added stability - Bend: 103mm drop x 70mm reach

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options: 0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

This replacement seatpost for the Tarmac SL7 ensures the perfect fit with two different setback options—0mm and 20mm. - Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt. - FACT carbon construction and aerodynamic profile compatible with the 2021 Tarmac SL7. - Setback: 0/20mm. - Sleek Di2 integration hides the Di2 junction box inside.

This replacement seatpost for the Tarmac SL8 ensures the perfect fit with two different setback options—0mm and 20mm. - FACT carbon construction and aerodynamic profile compatible with the 2024 Tarmac SL8. - Setback: 0/20mm. - 20mm offset: 2-bolt micro-adjust clamp with 46mm saddle rail cradle enables an effective offset from 0mm to 20mm. - 0mm offset: Cylindrical aluminum head assembly adjusts fore-aft and tilt with an easy-access single bolt.

- Up to 200mm of vertical travel adjustability with limitless positioning - Tool-free adjustable travel design which let you adjust the travel by 5mm increment depending of rider's preference - Internal cable routing only - Clamp design compatible with standard 7mm (alloy) or 9mm (carbon) saddle rails - Includes 1x remote lever Travel option: - 95-120mm - 120-150mm - 140-170mm - 170-200mm

Ride anywhere with this wide range XG-1275 cassette—it always provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. X-GLIDE2 improves both inboard and outboard shifting, as well as chain retention. - Cassette Body Type: SRAM XD Cogs: - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

- Stable Shifting Performance - Pulley Follow-Up In Certain Distance - Shimano Shadow Rd Construction - Low Profile Rear Derailleur Design - Race Endurance For Less Damage In Crush - Adapted For Race Specific Frame Design - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T

Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams

Three-Speed Sturmey Archer Coaster Brake Trike Conversion Kit - 21T Front Drive Cog - 22T Rear Transfer Cog - 24T Axle Drive Cog - Cable stop required when installing on Sun Atlas Industrial Cargo Trike

With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation