Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$13.99 - $27.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$16.00 - $21.99
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
$17.99 - $27.99
- AL6061 alloy tubeless Presta valve
- Includes 2 O-rings, one standard profile and one aero profile, for an airtight seal on any rim
- Removable valve core for installing sealant
- Additional replacement valve cores sold separately
- Sold individually
$19.99 - $24.99
- Supplies full wheel illumination for 700c/29in wheels and smaller
- Approximately 40 hrs of battery life
- Water resistant design
- Includes 3 (AA) batteries
- Sold individually (1 wheel)
- Easy to install
$21.99 - $22.99
Converts CenterLock hubs to accept 6-bolt rotors
- Available for standard Quick Release as well as Thru-Axle hubs
- Extruded alloy collar with CNC shoulder pins and lock ring
- Eliminates the need for rotor bolts
$22.99 - $39.99
Elite Series skewers for fat bike applications
AL6061 alloy lever with CrMo axle
Available for 135mm, 150mm, 170mm, and 190mm OLD spacing
$24.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
$24.99
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
$27.99
These lightweight valves help prevent clogging from tubeless sealant.
- Aluminum
- 40mm length
$39.99
WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
- Presta
- 46mm
$42.99
• 5-sided key locking skewer set
• Chromoly axles
• 6061 anodized aluminum
• Includes seat and F+R wheel skewers
• 95g (set)
$42.99
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits Campagnolo / Italian rear hubs - Type: Solid Axle - Threads: 10mm x 26tpi - Diameter: 10mm - Length: 174mm - 1 axle per bag
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$54.99
Excellent choice to upgrade your compatible fork and wheel to a disc brake.
Aluminum construction
Full ball bearing action
Includes caliper and mounting hardware
Compatible with linear pull/mech disc brake levers
Black housing
Shimano Equivalent BR-M375
Front/Rear: Frt or Rr Rotor Size: 160mm
Color: Black Brake Type: Mechanical
Caliper Mount: Standard Post Mount
$74.99
XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette on your SRAM Rise 60 wheels.
• Driver body design that lets riders tap the power and range of the SRAM 10-42 11-speed Cassette and a 10-tooth small cog
• Provides a stable hub connection
$79.99
- Original equipment freehub bodies to fit SRAM hubs and wheels.
- Includes Right Axle End Cap
$149.99
Basic replacement fork for cross country mountain bikes or an excellent choice for gas bike kits. Mount rim brakes or upgrade to disc brakes. Other sizes, colors, and options are available.
Coil spring / rebound adjustment
Alloy lower legs and crown
Steel steerer tube
2060g
Type: Suspension Size: 26"
Steerer Type: Threadless Steerer Size: 1-1/8"
Steerer Length: 260mm Brake Mount: Post Disc/V-Brake
Color: Black Rake: 30mm
Race Diameter: 30mm Axle: QR9
Travel: 80mm
$175.99
The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it.
- Made in Minnesota to aerospace standards
Previous page
Page 2 of 2